Softpaq: SP1034 File name: MDMCFG.EXE Part Number: 181640-001 Title: PCMCIA Modem Enabler for DOS/Windows Version: 1.01 Rev A CATEGORY: Software EFFECTIVITY DATE: 23 November 1994 PRODUCTS AFFECTED: LTE Elite Contura 400 Concerto OPERATING SYSTEM: DOS/Windows SYSTEM CONFIGURATION: not applicable DESCRIPTION: The program "MDMCFG.EXE" is a direct enabler for PCMCIA modems used in a DOS or Windows environment. It handles configuration of a modem in either PCMCIA slot of a Compaq portable computer, without requiring loading of any PCMCIA software other than Socket Services. Developed for use with Compaq PCMCIA modems, this enabler is also compatible with other PCMCIA 2.01-compliant modems. (Specific popular PCMCIA 2.0 modems are also supported, such as the Megahertz 14.4 Data/Fax modem with X-Jack.) SUPERCEDES: None HOW TO USE: 1. Obtain a formatted 720KB diskette. 2. If SoftPaq obtained on diskette, copy the SoftPaq file to a temporary directory on the hard drive and go to that directory: MD C:\ENABLER COPY A:\SP1034.EXE C:\ENABLER C: CD \ENABLER If SoftPaq downloaded from BBS, go to the directory where downloaded to: C: CD \ENABLER PKUNZIP SP1034.ZIP 3. From that drive and directory, run the SoftPaq utility to unbind the primary files. Type SP1034 (and press ENTER). The following files should be created: 181640EN._01 QRST5.EXE SP1034.DOC 4. Create the diskette image by running this command at the DOS prompt: QRST5 (and press ENTER) 5. The "Select Option for Creating Disk" prompt appears. Choose the highlighted, default selection "All diskettes in the Set" by pressing ENTER. 6. The "You will need to have the specified number of each type(s) of pre-formatted media..." prompt appears. It is asking for one 720 KB diskette. Verify that you have a formatted 720 KB diskette and press ENTER to accept and continue. IMPORTANT: Only a 720 KB diskette can be used, other types of media cannot be substituted. 7. The "Enter Destination Drive" screen will appear. Insert a 720 KB diskette into drive [A] or [B]" prompt is given. (Either A or B will be included in the prompt, depending on where your 3.5 inch diskette drive is located.) If the drive shown in the prompt is not the one you wish to use, change the value by pressing either A or B. To begin diskette creation, press ENTER. 8. A counter box will be displayed during creation showing status. The number of cylinders will count up to 80. 9. When QRST5 has completed, it will exit back to DOS. 10. At this point, the PCMCIA Modem Enabler diskette has been created and is ready to use. 11. Please view the README.TXT file on the newly created PCMCIA Modem Enabler Diskette for installation instructions and paramater settings. _____________________________________________________________________________ Copyright 1994, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies