Softpaq Solution:  SP1149
Part Number: 196327-402
Title:  Compaq Personal Computer Diagnostics 
Version:  10.03A

NOTE: If you are using Compaq Diagnostics on a Compaq ISA Platform, SP1150 is also required for configuring a platform with Compaq Diagnostics/SETUP.

CATEGORY:  Diagnostics/Setup

EFFECTIVITY DATE:  28 February 1995

PRODUCTS AFFECTED:
Desktops               Portables
================================
Deskpro/M Family       Concerto
Deskpro/i Family       Contura Family
Deskpro XE Family      Contura Aero Family
Deskpro XE Family/NIC  Contura 400 Family
Deskpro XL Family      LTE Lite Family
Presario Family        LTE Elite
ProLinea Family        Portable 486
ProLinea CDS Family    Portable 486c

OPERATING SYSTEM:  not applicable

SYSTEM CONFIGURATION: not applicable

SUPERCEDES:  SP1095, SP1037, SP1008, SP0898, SP0866, SP0768

DESCRIPTION:
Compaq Personal Computer Diagnostics resides on two 1.44 MB floppy diskettes.  One is the Diagnostics/TEST diskette (this SoftPaq).  The other is the Diagnostics/SETUP diskette (SP1150).

The Diagnostics supports ALL currently shipping personal computer (non-server) products.  It is installed on the Diagnostics Partition for those systems which support it and have hard drives.  It is shipped as diskette(s) on all other products.

A Compaq Personal Computer Diagnostics/TEST diskette contains programs that can:
- TEST both Compaq EISA and ISA machines from the Desktop and Portable Divisions.
- INSPECT (display machine config) both Compaq EISA and ISA machines from the Desktop and Portable Divisions.

A Compaq SETUP diskette contains programs that can:
- Configure Compaq ISA machines.

Program Updates:
- New product support
- Will properly detect if Diagnostics Partition Upgrade is available
- Modifications and enhancements to the INSPECT program

HOW TO USE:

1.  Download the SoftPaq to a directory on your hard drive and change to that directory.  The file downloaded to your hard drive is SP1149.EXE.

2.  Obtain one (1) formatted 1.44MB diskette and place it in one of your diskette drives.

3.  Execute the SoftPaq file to create the diskette:  SP1149 [ENTER]

4.  To run Diagnostics/TEST, power down your computer, place the Diagnostics/TEST diskette in Drive A:, and power up your computer.